Fuel Consumption Monitoring Vehicle Monitoring Fuel Tanker Monitoring. Cargo Fuel Tank Monitoring Remote Fuel Storage Tank Monitoring Monitoring and Reporting
 
    
 
HOME
      
    NEWS
    CONTACT
    ABOUT TECHNOLOGY
  - about GPS
  - about M2M
   GPS ON TRANSPORT
  - introduction
     - "Off-Line" Monitoring
     - "On-Line" Monitoring
   SOLUTION
  - About solution
  - GPS passive monitoring
  - GPS-GSM monitoring
  - Fuel Monitoring
  - Tanker monitoring
  - Fuel Storage monitoring
  - Diesel Generator monitoring
  - GPS-Radio monitoring
    MAIN PRODUCTS
  - GPS "Off-Line" monitoring
  - GPS-GSM/GPRS monitoring
  - GSM/GPRS monitoring  
  - fuel level sensors
    ALL PRODUCTS
  - products list
  - documentation, leaflets
   BY APPLICATION
    
    RELATED VIDEO 
    DOWNLOADS
     
   DISTRIBUTORS LIST  
   ORDER PROCEDURE  
   USEFUL LINKS 
               
   COOPERATION:
  - for distribution (distributors)
  - to integrators, providers
 
 
 
                Fuel Saving
 Control Fuel Consumption

 

Saving Fuel,- Increase Your Profit

"GuardMagic fuel saving system" is repaid  in 3-6 weeks, primarily due to fuel theft (drain) and fuel fraud decrease. In practice, this means ...
  
 
PRODUCTS
  
 
        
     FUEL STORAGE MONITORING PRODUCTS - Hardware
 

GuardMagic FSM series
 
Series of GSM/GPRS fuel storage monitoring modules.
Modules also are ready for: diesel generator monitoring, temperature monitoring, freezer monitoring.
 
GuardMagic FSM modules is intended for the construction: fuel storage monitoring system; diesel generator monitoring system, temperature monitoring system.
 
Base module: GuardMagic FSM2
 
 GuardMagic FSM1    GuardMagic FSM2    GuardMagic FSM3             
 
   
GuardMagic FSM series - the table of comprasion
 
 
The main function of GuardMagic FSM series modules is shown in below table:
   
 

Type of function

GuardMagic FSM series
FSM2/1 FSM3/1 FSM3/2
1  Application      
1.1 Indoor + + +
1.2 Outdoor - - +
1.3 Additional optional IP65 plastic case for outdoor application + - -
      in redeveloping
         
2  Power source      
2.1 Main Power 9... 12 V DC + + +
2.2 External reserve battery  (6,3 V , 1,2 A/h) + + +
         
3. Inputs in general      
3.1 Logical inputs (ummary) 4 4 4
3.2 Pulse inputs (frequency or counter) 2 2 2
3.3 Analog input (analog fuel inputs) - - -
3.4 EIA- 485 interface (digital fuel sensors connection) 1 1 1
3.5 1-Wire interface 1 2 2
         
4. Main connection      
4.1 Total fuel level sensors (fuel tank or fuel compartments monitoring) 3 7 7
4.2 Analog fuel level sensor - - -
4.3 Fuel level sensors with digital communication interface EIA-485 (GuardMagic DLLS1,DLLS2, DLLE1, DLLE2 or with the same communication protocol) up to: 3 7 7
4.4 Tamper sensor or tamper circuit (logical) 1 1 1
4.5 Customer logical sensor or circuits 3 3 3
4.6 Pulse circuits or sensors (for example: Flow meter, engine RPM etc.) 2 2 2
4.7 Temperature sensors up to: 7 7 7
         
5. Main technical data and function      
5.1 "Fuel resolution (on EIA-485 bus, depend of type of sensors) up to levels:
1024 or
4096
1024 or
4096
1024 or
4096
5.2 Functionality: operation mode, programming mode + + +
5.3 Operation mode: Real Time, Packet, logger + + +
5.4 Data transmitting: GSM/GPRS 900/1800/1900 or Quad + + +
5.5 GPRS connection to monitoring station: main or reserve + + +
5.6 Internal memory (to store collected data) + + +
5.7 Automatic storing collecting information if GPRS or Internet
connection is absence.		 + + +
5.8 Automatic transmitting (or storing) data from fuel level sensors
and external sensors		 + + +
5.9 Connection to temperature sensors + + +
5.10 Staff identification - + +
5.11 Automatic activation for data sending (alarm data):
 Tamper;
 Logical inputs activation;
 Fueling or Fuel drain over;
 Main power alarm (if reserve battery connect);
 Pulse signal starting.		 + + +
5.12 User programming periodicity of data sending + + +
         
6. Additional      
6.1 Main Power control (if reserve battery connecting) + + +
6.2 Possibility connection to pulse flow meter and/or engine RPM
sensor (pulse counting)		 + + +
6.3 Base station time synchronization + + +
       
           
Application:
 
 
Fuel Storage Monitoring Diesel Generator Monitoring Temperature Monitoring Refrigerator, Freezer Monitoring  
                                                          
 
 
       GuardMagic, Riga, Latvia
       avl@guardmagic.lv ;  avl1@guardmagic.lv ; info1@guardmagic.com  
 

Copyright © 2008, GuardMagic      WEB master