|
|
| |
GuardMagic DLLE2ct
Robust
Digital Fuel
Level Sensors with EIA-485 communication interface
for application in
hazardous area.
Application: stationary objects .
Available sensor length:
from 3000 mm and up to 6000mm
|
|
|
1. ABOUT
| |
 |
Fuel and Oil
level sensor GuardMagic DLLE2ct is intended for precission fuel
level measurement in stationary tanks.
GuardMagic DLLE2ct
operating only together with GuardMagic JBB01 intrinsically safe barrier.
GuardMagic DLLE2ct
fuel level sensor is designed with EX equipments requirements.
GuardMagic DLLE2ct
fuel level sensor is designed for operation in the wide temperature range.
Sensor has die cast aluminum case for
mechanical protection.
GuardMagic DLLE2ct sensor use the capacitive technology and has not any
moving parts.
Advantages:
- Standard and
heavy application
- Operation in wide temperature range
- "0" zone
application
- Anti vandal protection
- Digital communication interface
- High resolution (up to 4096 levels)
- High noise immunity
- Sensors serial connection (multi tank support)
- Operation liquids: from raw oil and up to kerosene
- Self testing
- Strong mounting
|
2. SENSOR VERSIONS
GuardMagic DLLE1ct
(GM2.024) has one connection cable without connector
for connection to GuardMagic JBB01 intrinsically safe
barrier.
Connection cable length is
3 meters.
Available sensors length:
3000mm; 4500mm; 6000mm.
Notes:
1) Sensors length marks as: GuardMagic DLLE2ct-XXX
(“XXX” means the length of the sensor in mm).
2) In installation procedure sensor can be cute up to
the previous value of length (up to about 30%).
3. MAIN DATA
|
Power
supply:
|
10 V
powered by
GuardMagic JBB-01(Intrinsically Safe Barrier).
GuardMagic JBB01 operation voltage 11…36V
|
|
Operation principle:
|
capacitive
|
|
Resolution (number
of gradation):
|
1024
or 4096 level
|
|
Data Line:
|
isolated
|
|
Power Line:
|
isolated
|
|
Main operation
liquids*:
|
oil, fuel oil,
diesel fuel, transformer oil, petrol, kerosene,
fuel jet
|
|
Communication interface:
|
EIA-485
|
|
Communication speed:
|
19 200
bit sec
|
|
Sensor serial
connection:
|
YES (by GuardMagic
JBB01) |
|
Network mode:
|
YES |
|
Internal data filter:
|
YES,
programmable
|
|
Customer sensor
programming (setting):
|
YES |
|
Ingress protection:
|
IP65 |
|
Impact protection:
|
IK10 |
|
Anti vandal housing:
|
YES, die cast aluminum
|
|
Operation mode:
|
continues |
|
Operation pressure:
|
atmospheric |
|
Operation temperature:
|
ambient:
-40 ...+80
liquids: -40
... +105
|
|
Sensor length:
|
3000mm; 4500mm; 6000mm |
|
Customer sensor
cutting:
|
YES
|
|
Mounting:
|
Six bolts M6 or Six
screws 5,5
|
|
Connector type:
|
Superseal
(Tyco Electronics), plug 4 pin
|
|
Connection cable:
|
All weather. Usage
under difficult environment conditions
UF, water, mineral
or synthetic oil, petrol,
detergents/cleaners/lotions resistance.
|
* - Note:
- sensor not operated in
water.
5. AVAILABLE APPLICATION
- fuel storage
tanks;
- fueling station.
5. ABOUT SENSOR CONNECTION
STRUCTURE
|
|
|
