|
|
GPS
OFF-LINE MONITORING PRODUCTS - Hardware
|
|
GuardMagic
mTF3
Advanced "GPS, Fuel
and Temperature Data Logger" with additional inputs,
driver identification function and USB output interface.
mTF PHOTOS |
mTF3 FUNCTIONALITY
GuardMagic
mTF3 provides a record in internal non-volatile memory the following
information:
-
trip of vehicle
(GPS track; geographic coordinates);
-
traffic
parameters (speed, time);
-
fuel level
information in fuel tanks (up to SIX tanks);
-
data from digital
temperature sensors (up to SEVEN sensors);
-
status of
ignition circuit (engine On-Off);
-
active driver
identification code (driver ID code);
-
fact of engine
overheat;
-
event button
pressing;
-
condition of
external logic sensors (up to THREE sensors);
-
condition of
engine starting;
-
engine RPM;
-
data from the
odometer circuit (control information to determine traffic if the GPS signal
absence. Tunnels, the underground garages, etc.).
-
status of GPS
receiver;
-
status of main
power supply.
Transfer data to
personal computer is carry out by standard USB Flash Drive (USB stick).
GuardMagic mTF3 main Input-Output circuit (connection):
-
main power 12/24
V;
-
additional
reserve battery 12V;
-
driver
identification circuit;
-
SIX digital fuel
level sensors;
-
SEVEN digital
temperature sensors;
-
ignition circuit
(ignition switch);
-
engine overheat
sensor;
-
EVENT button;
-
three customer
logical sensors;
-
engine RPM sensor
(or electrical circuit of engine RPM);
-
odometer
electrical circuit;
-
external siren
(buzzer);
-
visual alarm LED;
-
engine blocking
relay;
-
USB port, for
connection standard USB Flash Drive.
Information
recorded (saved) in GuardMagic mTF3 later transferred to a personal computer,
where they carried out a full analysis of this information using special
software.
|
|
