Fuel Consumption Monitoring Vehicle Monitoring Fuel Tanker Monitoring. Cargo Fuel Tank Monitoring Remote Fuel Storage Tank Monitoring Monitoring and Reporting
 
    
 
HOME
      
    CONTACT
    ABOUT SYSTEM
  - about
  - benefits (brief)
  - get a tour
  - quick view
   IN DETAIL ABOUT:
  - fuel monitoring
  - temperature monitoring
  - application
   SYSTEM BASED ON:
  - mTF1
  - mTF2
  - mTF3
  - modules functionality table
   DISTRIBUTORS LIST  
   ORDER PROCEDURE  
 
 
 
                Fuel Saving
 Control Fuel Consumption

Fuel monitoring system. Fuel saving system

 

"GuardMagic fuel saving system" is repaid  in 3-6 weeks, primarily due to fuel theft (drain) and fuel fraud decrease. In practice, this means ...

  
 
SOLUTION - "Off-Line" MULTIFUNCTION FUEL & GPS MONITORING
(Post Trip Fuel & GPS Monitoring)
  
 
        
   GuardMagic mTF series, modules functionality table

     Guardmagic mTF-GPS & Fuel Data Logger with USB port for Flash Drive Connection and driver identification function.

GuardMagic mTF1
GPS & Fuel Data Logger with USB port for Flash Drive Connection.
Connection to analog fuel level sensor
GuardMagic mTF2
GPS & Fuel Data Logger with USB port for Flash Drive Connection.
Connection to analog fuel level sensor, engine RPM and odometer circuits.
GuardMagic mTF3
GPS & Fuel Data Logger with USB port for Flash Drive Connection.
Connection to digital fuel sensor (till 6sensors), digital temperature sensors (till 6sensors) engine RPM and odometer circuits.
 

Benefits:

Stored transportation data in standard USB Flash Drive;
Driver identification function;
Immobilization function;
Support from TWO till SIX fuel tanks;
Connection to temperature sensor (or humidity sensors), till SEVEN sensors.

The main function of GuardMagic mTF series modules is shown in below table:

 
  Type of function GuardMagic mTF serie
    mTF1 mTF2 mTF3
1 Power Source:      
1.1 Vehicle battery 12 /24 V (9 30 V) + + +
1.2 Additional external reserve battery (12 V , 1,2 A/h) + + +
         
2 Main Function:      
2.1 GPS information stored (speed, date, time, coordinates) + + +
2.2 Stored information from external sensors (logical, analog, digital) + + +
2.3 Internal memory 4MBytes (Flash; about 240 TH points) + + +
2.4 Stored transportation data in standard USB Flash Drive + + +
2.5 Driver identification + + +
2.6 Immobilization function (engine blocking) + + +
2.7 Support till FIVE drivers + + +
2.8 Fuel monitoring function. + + +
2.9 Temperature monitoring - - +
2.10 RPM monitoring - + +
         
3 Connection:      
3.1 Ignition + + +
3.2 Event BUTTON + + +
2.3 Overheat sensor + + +
3.4 Customer Logical sensors up to 3 sensors + + +
3.5 Connection to analog fuel sensor (GuardMagic FLPa or vehicle regular sensor with analog output). + + -
3.6 Engine RPM sensors (RPM impulses) - + +
3.7 Connection to digital fuel sensors (GuardMagic DFLS3, GuardMagic DLLS or sensors with the same communication protocol).
Up to SIX sensors (up to SIX fuel tanks)
- - +
3.8 Connection to digital temperature (and/or humidity sensors). Up to 7 sensors. - - +
         
3 Additional functions:      
3.1 GPS receiver control function + + +
3.2 Main Power control + + +
3.3 Led and sound indication + + +
3.4 Possibility to connect to additional concentrator - - +
 
 
       GuardMagic, Riga, Latvia
       avl@guardmagic.lv ;  avl1@guardmagic.lv ; info1@guardmagic.com  
 

Copyright 2008, GuardMagic      WEB master